Dirt Conveyors, 10 foot section length
Width 15 inches
Depth 7.5 inches
Weight 160 lbs
Construction Stainless Steel, Aluminium / Composite
Speed 33 FT/Min
Nominal Load 280 lbs
Maximum Inclination 45°
Nominal Capacity 25 Ton/Hour (16 CU YDS/HR)
Voltage 110AC
Belt
Material Heavy fabric reinforced PVC (EMSHA & flame retardant option)
Width 12 inches
Thickness 0.125 inches
Fastener Multi-tooth stainless steel (Mining specification option)
Standard Cleats 0.75” @ 12” centres / 20mm @ 300mm centres
Electrical
Voltage 110 V or 230 V standard. 200-600 V Three Phase option
Output Power 370 W
Frequency 50/60 Hz
Control Voltage 24V AC
Safety System Monitored loop including overload sensors
Motor Type Single phase induction motor (3 Phase/hydraulic options)
Motor Protection Motor enclosed to IP66 rating with a thermal overload
Control System
Number of Miniveyor units from single power source
110 Volt Control Box 3
Must haev terminator plug at end of all conveyor runs
Only operates on 15AMP breaker/extension cord. Can be no longer then 50ft and have to be 10 gauge
Other complimentary earth moving equipment:
Skid Steer Loader, 7K-8K weight class